Attaching Guides with Adhesive

June 6, 2017|Flex Coat

The article will show you how to temporarily attach guides with Flex Coat Guide Foot Adhesive. View the steps below for more information.

1. Heat the guide foot with a lighter.

2. Rub Flex Coat Guide Foot Adhesive on the guide foot, leaving a very thin coat of adhesive.

3. Quickly press the guide-foot firmly in proper position on the blank. Be sure to maintain alignment.

Cork Ring Clamp Instructions

November 22, 2023 Flex Coat

Designed to compress cork rings together until the glue dries. Eliminates gaps between cork rings for a smooth, professional handle. You can download the instructions here: Cork Ring Clamp Instructions

Hand Rod Wrapper (HW1) Instructions

November 22, 2023 Flex Coat

This highly versatile rod wrapper is designed to do precision wrapping. With two tension devices and adjustable thread feed, this is the most popular unit for custom rod builders. You...

DX777 Instructions

November 22, 2023 Flex Coat

The DX777 offers ultimate control, dual-purpose, and unmatched ergonomics in one machine. You can download the instructions here: DX777 Instructions PDF

Custom Fitting Reel Seat Arbors

June 06, 2017 Flex Coat

Using Pilot Drill Bits Pilot drill bits are any bit with a self-guiding shaft on the tip designed to follow a pre-existing hole. In this case the pre-existing hole in...

View All →