Finishing Motor with Slip Clutch
$125.00 – $375.00
High quality USA built gear motors with self-adjusting chuck for rotating rod while applying and curing Flex Coat finish.
|GMSL6||6RPM Flex Coat Finishing Motor with Slip Clutch|
|GMSL6-HD||6RPM-HD Flex Coat Finishing Motor with Slip Clutch|
|GMSL18-HD||18RPM-HD Flex Coat Finishing Motor with Slip Clutch|
|GM40-HD||40RPM-HD Flex Coat Finishing Motor with Slip Clutch|
|GM200||200RPM Flex Coat Finishing Motor with Slip Clutch|
High quality USA built gear motors with self-adjusting chuck for rotating rod while applying and curing Flex Coat finish. 6 RPM model for applying finish to rods with underwraps. 18 RPM is good for general use. 40 RPM is good for faster application.
Flex Coat epoxy finishes, epoxy glues, color preserver, brush cleaner, and thermal adhesives have a shelf life of 2 years and should be stored in a cool dry place that has low light exposure. Color Preserver should not be allowed to freeze.
It is our goal to have the complete satisfaction of our customers. For any warranty issues contact us at 512-858-7742 or email@example.com
Flex Coat’s return policy on all our quality products extends to un-opened or unused products only. Contact us within 30 days of receiving the items and ship to:
15901 FM 150 West
Driftwood, Tx 78620
We ship with UPS at a flat rate of $10 for orders under $50 and offer free shipping on orders $50 and over. This is only for the continental US. Alaska and Hawaii must call or email for shipping rates.
Expedited shipping available on equipment and supplies only. Please call or email.
International customers are welcome, please contact us for more info.