Reel Seat Arbors

Reel Seat Arbor

Glued in place with epoxy, these lightweight arbors create a super strong bond between the reel seat and the rod blank that increases sensitivity. The arbor is a solid, semi-porous polyurethane material that is machined to fit most sizes of reel seats and can be turned down to fit between sizes. All arbors have a 1/4” inside diameter pilot hole which can be easily reamed or drilled out to fit any rod blank.

100 Pack 3 Pack Description
RS16A RS16AX3 Arbors for 16mm Reel Seat .595” OD x 3.80”
RS16 RS16X3 rbors for 16mm Reel Seat .615” OD x 3.80”
RS17 RS17X3 rbors for 17mm Reel Seat .675” OD x 4.20”
RS18 RS18X3 rbors for 18mm Reel Seat .711” OD x 4.25”
RS20 RS20X3 Arbors for 20mm Reel Seat .790” OD x 4.38”
RS22 RS22X3 rbors for 22mm Reel Seat .865” OD x 4.75”
RS24 RS24X3 rbors for 24mm Reel Seat .930” OD x 4.75”

camera Watch Our Short Instructional Video "Buildin’ a Pre-Shaped Cork Handle"


Pilot Drill Bits

The pilot drill bit guides itself through a pre-existing hole in order to increase the diameter. These tools are made from spade bits with an aluminum pilot on the tip. When used with a hand drill the result is a perfectly centered hole. Flex Coat Pilot Drill Bits are available in 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, & 5/8”.

PB5/16 - Pilot Bit 5/16”
PB3/8 - Pilot Bit 3/8”
PB7/16 - Pilot Bit 7/16”
PB1/2 - Pilot Bit 1/2”
PB9/16 - Pilot Bit 9/16”
PB5/8 - Pilot Bit 5/8”

camera Watch Our Short Instructional Video "Buildin’ a Pre-Shaped Cork Handle"